Design & Order Your LED Logo Online

Our standard for every lighting type is a solid acrylic body with encapsulated LEDs. We don’t make hollow profiles. Back-lit LED signs also come in two more affordable indoor versions made of rigid foam or wood, with the LEDs shining openly from the back. These versions suit matt, non-reflective surfaces.

When the logo is mounted on rails or a panel, all the wiring runs inside the substructure and joins into a single cable. That cable can come out at any point you choose. The substructure is painted in a colour of your choice, such as a RAL shade that matches your wall. Free-standing elements have no substructure, so the cables from each element need to be brought together behind the surface on site, for example in a drywall or cavity wall or behind a cover panel.

Yes, in the solid acrylic version. The LEDs are sealed inside the acrylic body and protected to IP65 against dust and water spray.
 

We use LED modules rated for 50,000+ hours, and acrylic that doesn’t yellow. At an average of 12 hours a day, that’s more than ten years. Running 24/7 shortens the life of the LEDs considerably. Every unit is also tested in continuous operation before it ships.

Yes. Depending on the lighting type, fine lines and narrow gaps can also be manufactured. We perform a production feasibility check on each order, so if something is not producible, we will contact you before manufacturing.

For front-lit and back-lit signs, we paint to RAL (Pantone and NCS are also possible) in a choice of surface finishes. The standard is satin, but gloss and matt are also available. Colour gradients aren’t possible on the LED elements, so each element has one colour. For side-lit signs, the fronts are covered with film that comes in a wide color range.

We work exclusively with white light in four colour temperatures: 2700 K (warm white), 4000 K, 5000 K (neutral white) and 6500 K (cool white). The range goes from cosy, warm light to crisp, technical white.

Every logo arrives ready to install. It comes pre-wired, with a wiring plan and a drilling template, so you can mount it on site without special tools. We recommend having a qualified electrician to connect it to the mains.